Air Separators | NOOR SCIENTIFIC & TRADE https://noor-scientific.com Gate To Innvotion Wed, 30 Sep 2026 14:02:16 +0000 en hourly 1 https://wordpress.org/?v=7.1.3 https://noor-scientific.com/wp-content/uploads/2024/11/cropped-Logo01-32x32.png Air Separators | NOOR SCIENTIFIC & TRADE https://noor-scientific.com 32 32 Taco Tangential Air Separators (ACT / ACTF Series) https://noor-scientific.com/electromechanical/taco/taco-tangential-air-separators-act-actf-series/ Wed, 30 Sep 2026 14:01:30 +0000 https://noor-scientific.com/?p=27455 Carbon steel tangential air separators that remove free air and reduce suspended sediment in hydronic heating and cooling systems. Available with or without a removable stainless steel strainer.

The post Taco Tangential Air Separators (ACT / ACTF Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]>

Taco Tangential Air Separators (ACT / ACTF Series)

  • Taco ACT/ACTF Separators use tangential connections to create cyclonic flow. Centrifugal action directs water towards the vessel wall while separated air collects towards the centre and rises to the top connection for venting or return to a plain steel expansion tank.
  • ACT models are supplied without a strainer; ACTF models include a removable 304 stainless steel strainer for capturing larger debris. Multiple sizes and pressure ratings accommodate different system requirements.
  • Standard connection sizes: 2"–20"; larger units up to 36" available.
  • Body: Carbon steel.
  • Separation design: Tangential inlet and outlet create cyclonic flow.
  • Standard working rating: 125 psi at 375°F (approximately 8.6 bar at 191°C).
  • Optional working pressure: 150 psi (approximately 10.3 bar); higher ratings upon factory consultation.
  • Connections: NPT on 2" and 2½" models; ASME B16.5 flanges on models 3" and larger.
  • ACTF strainer: Removable 304 stainless steel with 3/16" perforations (approximately 4.8 mm).
  • Strainer free area: At least five times the nozzle opening area to limit pressure loss.
  • Service connections: Top air vent/expansion tank connection and bottom blowdown connection.
  • Options: Larger sizes, higher pressure ratings and alternative construction materials.
  • Helps reduce air locking and maintain circulation.
  • Supports heat transfer and system efficiency.
  • Helps reduce air-related corrosion, pump damage and operating noise.
  • ACTF strainer captures larger debris and is removable for cleaning.
  • Compact construction helps minimise installation space.
  • Helps extend the service life of pumps, piping and components.
  • Hydronic hot water heating systems.
  • Chilled water and cooling systems.
  • Water and water/glycol circuits.
  • Commercial, institutional and industrial installations.
  • Air elimination systems with bladder or diaphragm expansion tanks.
  • Air control systems with plain steel expansion tanks.
  • ASME: Section VIII, Division 1 pressure vessel construction and stamping; U-stamp shown.
  • ISO 9001: Manufacturer’s quality management certification.
Request Info

Other Products From Taco Comfort Solutions

The post Taco Tangential Air Separators (ACT / ACTF Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]> Taco In-Line Air Separators (AC / ACF Series) https://noor-scientific.com/electromechanical/taco/taco-in-line-air-separators-ac-acf-series/ Wed, 30 Sep 2026 14:00:04 +0000 https://noor-scientific.com/?p=27449 Carbon steel air separators that remove free air from hydronic heating and cooling systems. Available with or without a stainless steel strainer for capturing larger debris.

The post Taco In-Line Air Separators (AC / ACF Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]>

Taco In-Line Air Separators (AC / ACF Series)

  • Taco AC/ACF Separators use a large-diameter chamber and internal baffle to reduce fluid velocity and change flow direction, allowing air to rise to the top connection. Captured air can be vented through an automatic air vent or directed to a plain steel expansion tank, depending on the system arrangement.
  • AC models are supplied without a strainer; ACF models include a removable stainless steel strainer for collecting larger particles. Multiple sizes, connections and pressure ratings accommodate different system requirements.
  • Standard connection sizes: 2"–20"; custom sizes up to 36".
  • Body: Carbon steel with exterior red oxide primer.
  • Internal design: Baffle-assisted, low-velocity air separation.
  • Standard working rating: 125 psi at 375°F (approximately 8.6 bar at 191°C).
  • Optional working pressures: 150, 250 or 300 psi (approximately 10.3, 17.2 or 20.7 bar); higher ratings upon request.
  • Connections: Threaded or ANSI flanged, depending on model; grooved options available.
  • ACF strainer: Removable 304 stainless steel, with 3/16" perforations (approximately 4.8 mm).
  • Strainer free area: At least five times the nozzle opening area to limit pressure loss.
  • Service connections: Top air vent/expansion tank connection and bottom blowdown connection.
  • Options: Alternative construction materials and custom sizes or pressure ratings.
  • Helps reduce air locking and maintain system circulation.
  • Supports heat transfer and system efficiency.
  • Helps reduce air-related corrosion, pump damage and operating noise.
  • Large separation chamber limits pressure loss.
  • ACF strainer captures larger debris and is removable for cleaning.
  • Compact construction helps minimise installation space.
  • Hydronic hot water heating systems.
  • Chilled water and cooling systems.
  • Water and water/glycol circuits.
  • Commercial, institutional and industrial installations.
  • Air elimination systems with bladder or diaphragm expansion tanks.
  • Air control systems with plain steel expansion tanks.
  • ASME: Designed, constructed, tested and stamped to Section VIII, Division 1.
  • National Board: Pressure vessel registration.
  • ISO 9001: Manufacturer’s quality management certification.
Request Info

Other Products From Taco Comfort Solutions

The post Taco In-Line Air Separators (AC / ACF Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]> Taco Hydraulic Separators (5900 FlexBalance Series) https://noor-scientific.com/electromechanical/taco/taco-hydraulic-separators-5900-flexbalance-series/ Wed, 30 Sep 2026 13:58:17 +0000 https://noor-scientific.com/?p=27443 Hydronic air and dirt separators using stainless steel PALL Ring technology to remove microbubbles and suspended particles. Available with an optional switchable magnet for magnetite removal.

The post Taco Hydraulic Separators (5900 FlexBalance Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]>

Taco Hydraulic Separators (5900 FlexBalance Series)

  • Taco 5900 Separators create a low-pressure-drop hydraulic bridge between primary and secondary circuits, allowing their pumps to operate independently and helping prevent unwanted flow between circuits.
  • Standard FlexBalance models use internal baffles. FlexBalance Plus models incorporate PALL Rings to combine microbubbles for venting and collect dirt for discharge through a blowdown valve, integrating hydraulic separation and system cleaning in one unit.
  • Connection sizes: 2"–12".
  • Body: Steel construction.
  • Standard working rating: 125 psi at 270°F (approximately 8.6 bar at 132°C).
  • Optional pressure ratings: 150 psi; 250 psi units referenced in the mechanical specifications, subject to factory selection.
  • Connections: Flanged, threaded up to 3", or Victaulic/grooved options.
  • Standard internals: Baffles for hydraulic separation.
  • Plus internals: Stainless steel PALL Ring baskets for air and dirt separation.
  • Plus separation capability: Microbubbles down to 18 microns and dirt/debris down to 35 microns.
  • Optimum flow rates: 63–1,409 US gpm (approximately 14.3–320 m³/h), depending on model.
  • Air vent: Integral brass conical venting chamber.
  • Plus cleaning: Bottom blowdown valve for accumulated dirt.
  • Options: ½" temperature/pressure ports on all nozzles; removable cover on Plus models for basket inspection and cleaning.
  • Allows primary and secondary pumps to operate independently.
  • Helps prevent hydraulic interference and unintended flows between circuits.
  • Supports variable-flow operation and energy savings.
  • Low pressure drop can allow smaller circuit pumps.
  • Plus models combine hydraulic, air and dirt separation, reducing separate components and installation space.
  • Integrated venting and blowdown simplify system maintenance.
  • Primary–secondary hydronic heating and cooling systems.
  • Boiler and chiller connections to distribution circuits.
  • Multiple-boiler and multiple-chiller installations.
  • Systems with different circuit flow rates or operating temperatures.
  • Low-mass boiler systems requiring controlled boiler flow.
  • ASME: Designed, manufactured and tested to Section VIII, Division 1.
  • National Board: Registration mark displayed in the datasheet.
  • ISO 9001: Manufacturer’s quality management certification mark displayed.
Request Info

Other Products From Taco Comfort Solutions

The post Taco Hydraulic Separators (5900 FlexBalance Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]> Taco Air & Dirt Separators (4900 Series) https://noor-scientific.com/electromechanical/taco/taco-air-dirt-separators-4900-series/ Wed, 30 Sep 2026 13:55:15 +0000 https://noor-scientific.com/?p=27438 Hydronic air and dirt separators using stainless steel PALL Ring technology to remove microbubbles and suspended particles. Available with an optional switchable magnet for magnetite removal.

The post Taco Air & Dirt Separators (4900 Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]>

Taco Air & Dirt Separators (4900 Series)

  • Taco 4900 Series Separators collect and combine microbubbles into larger bubbles for discharge through an integral air vent. Suspended dirt settles at the bottom of the vessel for removal through a blowdown valve.
  • The range includes air-only and combined air/dirt models in standard and high-velocity configurations. Optional removable covers provide access to the PALL Ring basket, while a switchable neodymium magnet captures magnetite and other ferrous particles.
  • Models: 4900-A for air removal; 4900-AD for combined air and dirt removal; high-velocity versions available.
  • Connection sizes: 2"–36", depending on model.
  • Connections: Flanged; threaded options on selected smaller models and optional grooved connections up to 2½".
  • Body: Carbon steel with exterior red oxide primer.
  • Internals: 304 stainless steel PALL Rings and inlet/outlet screens.
  • Separation capability: Microbubbles as small as 18 microns; dirt particles as small as 5 microns.
  • Pressure drop: 2 psi or less at the manufacturer’s specified optimal flow rates.
  • Design ratings: 125 or 150 psi at 240°F (approximately 8.6 or 10.3 bar at 116°C), depending on model; higher ratings available.
  • Fluid compatibility: Water and water/glycol mixtures up to 50% glycol.
  • Accessories: Integral air vent and flushing valve; full-port blowdown valve on air/dirt models.
  • Options: Switchable neodymium magnet, removable cover, base ring and custom connection sizes.
  • Documentation access: eLink NFC tags provide access to product documentation.
  • Helps maintain heat transfer and system efficiency by removing air and dirt.
  • Helps reduce air locking, corrosion, pump damage and operating noise.
  • Low pressure loss helps limit pumping energy requirements.
  • Optional magnetic separation protects components from magnetite accumulation.
  • Blowdown valve and optional removable cover simplify cleaning and maintenance.
  • Helps extend the service life of pumps, piping and system components.
  • Hydronic hot water heating systems.
  • Chilled water and closed cooling systems.
  • Boiler and chiller circuits requiring air or air/dirt removal.
  • Water/glycol hydronic systems.
  • ASME: Section VIII, Division 1 design and construction.
  • National Board: Pressure vessel registration.
  • ISO 9001: Manufacturer’s quality management certification mark shown in the datasheet.
  • Independent performance testing: Delft Hydraulics air and particle separation reports.
Request Info

Other Products From Taco Comfort Solutions

The post Taco Air & Dirt Separators (4900 Series) first appeared on NOOR SCIENTIFIC & TRADE.

]]>