CVD (Chemical Vapor Deposition) Furnaces
Furnaces designed for controlled material coating deposition via gas‑phase chemical reactions.
VAB Oil‑Removal Furnace – Vacuum Oil Separation System
The VAB Oil-Removal Furnace is a vacuum system used to remove oil remaining on parts after forming or stamping. The process heats components to the oil-evaporation temperature under reduced pressure, allowing oil vapors to be extracted and condensed in a dedicated exhaust system. The recovered oil is collected in a storage tank. This ensures parts achieve the required cleanliness level before the brazing process, improving joint quality and consistency.
- • Vacuum oil-separating system
- • Heating to oil-evaporation temperature under pressure
- • Special pumping system to extract oil vapors
- • Vapor condensation and oil recovery tank
- • Improves surface cleanliness prior to brazing
- • Compatible with aluminum components for VAB brazing
- • Ensures proper cleanliness before vacuum brazing
- • Enhances brazing quality and joint reliability
- • Recovers oil instead of releasing vapor into atmosphere
- • Reduces contamination and improves process stability
- • Environmentally friendly and resource-efficient
- • Pre-treatment of aluminum components before brazing
- • Removal of oils after stamping or forming
- • HVAC&R, automotive, aerospace and industrial aluminum parts
- • Any aluminum brazing line requiring clean components
Designed for industrial vacuum oil-removal and aluminum-processing standards.
Other Products From SECO/WARWICK S.A.
VECTOR – Single-chamber Vacuum Furnace with Gas Cooling
Single-chamber horizontal vacuum furnace with high-pressure gas quenching, designed for a wide range of heat treatment processes with high uniformity,
SUPER IQ – Universal Gas Carburizing & Quenching Furnace
Next‑generation carburizing furnace combining the benefits of traditional gas carburizing with vacuum‑quality cleanliness and low‑distortion quenching.
VAB Oil‑Removal Furnace – Vacuum Oil Separation System
Vacuum furnace designed to remove oils from stamped or formed aluminum parts prior to flux‑free vacuum brazing.